12 best brake pad firms

From the work of such consumables as brake pads, road safety depends, so drivers are very careful in their choice. The huge saturation of the market with different manufacturers only adds to owners of doubts about the correctness of the decision being made.

This review presents manufacturers whose products have the best performance. Places in the ranking were also distributed taking into account the specialists of service centers and estimated reviews of drivers operating the pads of certain companies on their cars.

Top Asian Brake Shoe Manufacturers

Despite the fact that the main segment of the market belongs to European companies, Asian manufacturers of brake pads also do not complain about the lack of demand. This is facilitated by the prevalence of Japanese and Korean cars around the globe. As for the purely technical characteristics, Asian brake pads, for the most part, have a good working resource, coupled with a high degree of reliability, but the price level for the original is quite high.

4 Sangsin

The largest manufacturer of brake pads in Korea occupies a leading position in supplying the domestic market, and on the external market it has long been recognized worldwide. The composition of the friction material obtained from the exclusive development of the engineering department conforms to world quality standards. Before launching a regular model into the series, testing is conducted (hot, cold and sports braking, recovery after braking), and the results obtained on the basis of results always exceed the requirements for the pads of a particular car brand.

Providing the majority of Korean auto giants with front and rear friction linings, the Sangsin Hi-Q product is represented on the Sangsin consumables market. All manufactured products come in the original packaging and embossed Sangsin Brake Industry. Using these pads in their cars, the owners note a low noise level when braking and dust settling on the disks. Also in their reviews, positively assess the presence of ceramic substances in the working layer - with it the pads have good ductility, which significantly extends the service life of brake discs.

3 Nisshinbo

Visual representative of manufacturers of brake pads for urban and sports applications. It’s impossible to say that there are unique solutions in manufacturing technology: the development is carried out according to the leading international quality standards using Ferodo material suitable for any driving style (cautious, moderate or more aggressive). In addition, there is a convenient gradation of the type of shoes for certain groups of cars, which is the main "chip" of the company.The owners of Japanese cars, such as the Toyota Camry or Mitsubishi Lancer, resort to using them predominantly, but the range of cars supported is not limited to passenger cars.

Advantages:

• pads have a clear gradation for certain types of cars (cars, SUVs, trucks);
• depending on the series differ in key characteristics;
• have a high degree of efficiency and durability.

Disadvantages:

• high price.

2 Hankook fixra

One of the best manufacturers of car tires very quickly mastered the brake systems market. Hankook Fixra - namely, under this name, the products are distributed in Russia - sharpened by the creation of brake pads mainly for Korean cars (such as the Kia Rio or the same Hyundai Solaris), which are very numerous on Russian roads. The main feature of Hankook (and here it is a truly unique case) is the use of Kevlar fibers in the production of friction linings, significantly increasing the wear resistance and durability parameters.

Advantages:

• use of Kevlar fibers, reducing wear on the discs and the clutches themselves;
• high durability parameters (for almost all models);
• from the “non-Korean” cars, the pads go to the Renault Logan, the Lada Priora, Kalina and other counterparts on the platform.

Disadvantages:

• high price.

1 Allied nippon

Already every year, Allied Nippon has received the deserved title of a leading manufacturer of brake systems worldwide. Needless to say - the arsenal of the company is very large. Here you can find both pads for native Japanese or Korean cars (Honda Accord, Hyundai Solaris, etc.), as well as developments for domestic VAZ (Priora, Kalina) and a number of European cars.

The entire line of brake pads is sharpened to the urban rhythm - they easily withstand a mixed driving cycle, accompanied by constant acceleration and sudden braking, thanks to the use of mineral metallic technology - ferrocarbon. However, the main advantage lies in the composition of the friction linings. The unique non-asbestos NAM114 blend has a high service life and, according to this indicator, is able to leave out analog developments from other manufacturers.

Advantages:

• availability of an assortment of pads for domestic cars (VAZ and GAS);
• products are great for mixed-cycle driving;
• the pads withstand short-term overloads, heat well;
• Asbestos-free friction and Ferro Carbon technology.

Disadvantages:

• usually high cost.

The best European manufacturers of brake pads

Europe is one of the pillars of the auto parts market and a reliable supplier of top brake pads. Manufactured products are distinguished by high quality and working resource parameters, however, the pleasure of acquiring it requires very tangible costs. The main problem of European shoes is forge - very often in the domestic market one can find cheap analogues of brake elements from well-known companies, which, however, fail after short use.

4 ATE

The German giant in the production of brake systems, originating back in 1958. As in the old days, innovation and pedantry inherent in the Germans are the fundamental concept of the production of shoes, which are in consistently high demand among Russian motorists. Among the supported models are not only European cars: here you can find pads under the "Solaris", and under the "Kia Rio", and even under the brainchild of the infamous General Motors - "Chevrolet Lacetti" and Russian American "Chevrolet Niva".

In the manufacture of an important element of the brake system, wear-resistant hard alloys of titanium, chromium, nickel, etc. are used, which guarantee the durability of work and the excellent performance of their direct duties. But the main asset of the company is ceramics - silent ceramic pads are widely used to complete supercars.

Advantages:

• a company with a rich production history and extensive experience;
• use of new production technologies in the pads;
• A large number of supported models of cars.

Disadvantages:

• consistently high cost.

3 Ferodo

The British grand production of automotive parts, known in Russia for the Ferodo Target brake series. It was this company that developed a unique technology of friction material (oddly enough, called Ferodo), which allowed us to achieve optimal wear resistance parameters of friction linings and braking characteristics. For many car enthusiasts, the key reason for buying brake pads of this particular brand is the optimal price (corresponding to quality), which other famous brands cannot boast of.

Advantages:

• very rare squeaks (often due to single defects of individual models);
• friction linings do not contribute to intensive wear of disks and do not dust;
• You can find pads for almost all running models of cars.

Disadvantages:

• not identified.

2 PILENGA

The main product of the company Pilenga, founded in 1947, today are brake pads and discs. As the largest supplier of these products to the conveyors of automobile plants in the USA and Europe, the manufacturer carefully monitors the quality. The in-house laboratory analyzes the chemical composition and structure of the raw materials, tests the parts for strength, tracking all stages of the production of brake pads in accordance with international standards.

Made from a high-grade alloy, the Pelinga pads do not overheat and do not allow vibration when braking; they ensure minimal wear on the surface of the brake discs. In their reviews, car owners point out that with a fairly low friction coefficient, the pads provide more than reliable operation of the braking system of a car without uttering any extraneous sounds in the form of squeaks or creaks. With frequent trips and heating of the friction material, the work of the linings is markedly improved, which makes them the best choice for lovers of aggressive driving style.

1 Lucas / TRW

Under the European brand Lucas in Russia, the equally well-known American corporation TRW has been operating, which for the past five years has been firmly taking place in the top five of the best manufacturers of auto parts and components. Conceptually, TRW does not make anything new in the production of brake pads, but uses the existing arsenal of funds at full capacity. That is why both the company and its products are favored by domestic motorists. Prices are affordable, especially in comparison with some grandees of the spare parts industry. One problem is a very high degree of forgery.

Advantages:

• high quality of products;
• the ability to find pads on all running models of cars (for example, Renault Logan, Chevrolet Lacetti, Chevrolet Niva, Honda Accord, etc.);
• acceptable prices.

Disadvantages:

• the market is literally teeming with low-grade fakes.

The best Russian manufacturers of brake shoes

The main advantage of brake pads produced in Russia relative to others is in the price level. This is one of the cheapest ways to complete the car with important brake elements.In general, their quality and resource cannot be compared with European or Japanese giants, but individual models are able to impose the best “struggle” for the championship, albeit purely in the realities of the domestic market.

4 EZATI

The front and rear brake pads of the Egoryevsk plant of asbestos technical products are deservedly popular with domestic motorists. Constantly improving the production technology, the company offers consumers a product with improved technical characteristics. In accordance with the new rules for the content of asbestos, the company, along with traditional asbestos products, launched a series of brake pads without this hazardous material.

To minimize counterfeits (there are quite a few fake products under this brand on the market), the manufacturer began production of pads, the body of which is painted blue using a special technology. The owners highly appreciate the products from Yegoryevsk, which is comparable in characteristics to European products. In their responses, they point to high braking characteristics of “cold” shoes. With frequent braking and heating, the friction coefficient decreases quite insignificantly (tenths of a percent), which practically does not affect the braking efficiency.

3 Marcon

A company whose products fly like hot cakes. In order not to overpay for expensive imported pads, users are increasingly looking for benefits in buying Russian-made goods. And often they do not regret it at all. The products of this company are not designed for high-speed driving and sudden braking from 100 km / h to zero, however, it maintains the city rhythm and moderate driving well. Due to the softness of the composition of the friction linings, the pads are dusty, but they do well with the heat sink from the friction zone (which, it is worth noting, significantly increases the usage time of the discs). Some motorists say that when installing a fresh set of creaks, but after a certain period of operation, it disappears. This situation arises from the fact that the geometry of the discs and the pads themselves do not always coincide, but in the process of using all inaccuracies are leveled and rubbed.

Advantages:

• the ability to repair the pads at the factory (cleaning, painting, applying a friction layer "Street" or "track" to choose from);
• good heat removal from the friction zone (affects the softness of the material of the plates);
• attractive price.

Disadvantages:

• Some models are prone to creaking.

2 RosDOT

Brake pads brand RosDOT are among the best among the domestic elements of the brake systems. Users speak very highly of the braking performance, ergonomics and cost of the kit, comparing them with leading European products. It is known for certain that in the manufacture of a friction layer, a special composition of antinoise mastic is used (according to the Italian “recipe”), sufficiently soft to suppress vibrations and prevent resonant vibrations at certain motion cut-offs. Such pads are installed mainly on domestic cars, such as the Lada Kalina, Priora or Grant, as well as the Renault Logan, Nissan Tiida and similar platform co-platform.

Advantages:

• The optimum ratio of price and quality;
• in addition to the above vehicles, the assortment has pads for Korean and Japanese cars (the same chassis "Solaris" and "Kia Rio", "Honda Civic" and "Accord");
• the lapping process proceeds quickly.

Disadvantages:

• individual models of pads do not withstand operational loads.

1 Sts

Worthy representative of the Russian production of brake pads. STS firmly cooperates with German companies, which makes high-quality products that meet all European standards. Obviously, the priority of release are the pads oriented to the models of the Renault-Nissan concern (Renault Logan, Renault Duster, Renault Capture) and co-platforms from VAZ (Lada Priora, Lada Kalina, etc.) d.) However, among the wide range you can find components for both Korean and American-Russian cars: “Hyundai Solaris” (“Elantra”), “Toyota Camry”, “Kia Rio” (or “Optima”), “Chevrolet Niva”, “ Chevrolet Lacetti, etc. This is the case when the quality of Russian production breaks the existing stereotypes.

Advantages:

• brake pads meet all quality standards;
• support for a wide range of vehicles;
• good braking and durability.

Disadvantages:

• not detected.

How to choose the right brake pads?

In order to choose the optimal model of brake pads, it is necessary to pay attention to a number of characteristic parameters:

Type of pads. Currently there are four types of brake pads: semimetallic (noisy, temperature-dependent, less wear-resistant, but more durable), organic (less noisy, less resistant to wear, create a lot of dust), low metal (improved heat transfer, increased dust separation and noise), ceramic (low noise, high wear resistance).

Price. The parameter depends on the type of delivery of the pads. The most expensive (and the highest quality) come straight from the factory. Average performance go to the parts market. The cheapest are exported in “packs” to developing countries. For the average consumer, the first two options are acceptable.

Working temperature. For everyday driving on city roads or fast driving on a highway, there are enough pads with a working temperature of 300-350 ° C. However, if you are the owner of a sports car - the purchase of pads operating at a temperature of 800 - 900 ° C, you can not avoid.

The appearance of the product (and packaging box). In order not to purchase a fake, you should carefully inspect the packaging and the product itself. The first must be neat, appropriate to the cost of the product, and contain in the label the sign of conformity ECE R90 (R-90 or 90R) European production standards. In turn, the product should not have cracks, chips and bends of the metal base, and the friction linings should fit snugly to it.

Pay attention to the accompanying documentation (its presence) and the certificate of quality indicated on the box, and then in your hands will be guaranteed the original brake pad, which will become a worthy component of your car.

Popular vote - who is the best brake pad manufacturer?
We vote!

Allied nippon

Hankook fixra

Ferodo

Lucas / TRW

Nisshinbo

ATE

Sts

Marcon

RosDOT

Sangsin

PILENGA

EZATI

Total votes: 732

Vote results