A place |
Name |
Feature Rating |
The best inexpensive electric convectors: a budget of up to 2000 rubles |
1 | Ballu BEC / EZER-1000 | The best functionality |
2 | Hyundai H-HV14-20-UI540 | Attractive price. The largest heating area |
3 | Timberk TEC.E0 M 1500 | Popular budget convector for home |
4 | RESANTA OK-2000S | High degree of reliability. The presence of a three-stage power regulator |
1 | Ballu BEC / EZER-1500 | The optimal ratio of price and functionality |
2 | Electrolux ECH / AG2-2000 T | Attractive design. High level of technical equipment |
3 | Noirot Spot E-3 2000 | High build quality. Popular wall convector |
4 | NeoClima Comforte T2,0 | Wide range of protective circuits. The best price |
1 | Alpine air NGS-30 | Ignition without electricity |
2 | Karma Beta Mechanic 5 | High power and reliable performance |
3 | Gorenje GH 6201 | Better build quality convector |
4 | Bartolini Calorama SSI 4500 | Lowest price in the segment |
1 | Nobo C4F20 | The best reliability. User selection |
2 | Ballu BEP / EXT-2000 | The best ratio of price and quality |
3 | Noirot Spot E-5 2000 | High quality workmanship |
See also:
Convector - heating installation, which is one of the derivatives of the heater, whose work is based on the phenomenon of convection. The essence of this process is expressed in the fact that warm air flows, having a smaller mass, rise upwards, providing continuous circulation indoors and, as a result, heating it. The cold air is sucked into the installation body using a special intake (fan), under the action of which it continues to flow further through the heating element (gas or electric) and exit through the structural holes. This process is continuous cyclical.
To date, the development of convectors is one of the activities of large companies that supply the market with various heating systems and elements. In this regard, in the segment there was a situation of an oversupply of sold models, of which it is very difficult to select something really worthwhile. Therefore, having carefully researched the market, we have prepared for you a rating of the best convectors, marked by consumers and experts.
The best inexpensive electric convectors: a budget of up to 2000 rubles
4 RESANTA OK-2000S
A country: Latvia
Average price: 1 580 rub.
Rating (2019): 4.5
RESANTA OK-2000S is the most popular of the cheap segment convectors, with a distinctive appearance to match all Resanta products. Its capabilities are limited by a three-stage regulation of heating power: 2000, 1250 and 750 W, respectively. With the maximum mode of operation, 20 square meters of space are subjected to effective heating, which is quite good both for a private house, and for an apartment, and even for a summer house (where it is most often purchased).
Due to the fact that RESANTA OK-2000C is a primitive convection system, its reliability approaches the level of 92-94%. The reason for such a good result is the presence of protection against overheating, waterproof housing, as well as a mechanical control unit along with a thermostat. The role of the work indicator is performed by a switch, equipped with a diode, triggered in case of a short circuit of the power supply. In general, this model is the most unpretentious system, the working resource of which is more than enough for ten years of uninterrupted work.
3 Timberk TEC.E0 M 1500
A country: China
Average price: 1 749 rub.
Rating (2019): 4.5
Timberk TEC.E0 M 1500 is an average model both in terms of price and performance.The maximum heating power is 1500 W, which will heat the room about 20 square meters. The device is equipped with reliable mechanical control, with which the inclusion is carried out. There are no temperature and thermostat adjustments - this is due to the low cost. A distinctive feature of this model is the possibility of wall mounting, which can significantly save free space.
In reviews to the pluses of this model, buyers include fast heating, low noise and attractive appearance. The dimensions of the device are not the smallest, but on the other hand it is quite stable during floor installation. Power is supplied from a standard 220/230 household network. The length of the power cord is 1.5 m, so an extension cord may be needed. Among the minuses - a noticeable air drying during heating and the absence of a thermostat.
2 Hyundai H-HV14-20-UI540
A country: Republic of Korea (produced in China)
Average price: 1 550 rub.
Rating (2019): 4.6
\ Hyundai H-HV14-20-UI540 is the most powerful model in the TOP - 2000 W, thanks to which the device will quickly heat a room up to 24 square meters. To maintain a constant temperature, the device is equipped with a thermostat that can withstand the specified parameters quite accurately. In case of overheating, the convector will turn off on its own in order to avoid breakage. Simple mechanical control allows you to conveniently set the heating temperature.
In reviews, users talk about the presence of 3 power modes, high-quality assembly and the availability of fasteners in the kit, as about the merits of this model. The device is installed on the floor and has stable legs for reliability. This is one of the most portable and lightweight devices - with a weight of 3.3 kg, the height is only 39 cm. A special indicator light tells you when the convector is working. The weak sides include only the lack of attachment to the wall.
- When calculating the required power of the convector for heating a certain area of the room is to add 30%. That is, if you plan to heat the room in 15 square meters. m., should buy a convector, designed for processing 20 square meters. m
- At installation of the convector it is necessary to consider several important rules: 1. At installation of the floor convector it is worth leaving space from below for air intake. 2. Installation of wall models is prohibited to do under the outlet. 3. It is forbidden to install convectors in rooms with a high content of dust and a high degree of flammability.
1 Ballu BEC / EZER-1000
A country: China (produced in Russia)
Average price: 2 230 rub.
Rating (2019): 4.7
The honorable line of the ranking of the best low-cost electric convectors for the home goes to Ballu BEC / EZER-1000. The 1000-watt device easily warms the room up to 15 square meters. With the ability to adjust the temperature, you can control the operation of the convector. In case of overheating or tilting in order to avoid failure, the device will shut off automatically. To ensure work for a specified time, the device is equipped with a timer, which can be set for up to 24 hours.
The strengths of this model in the reviews customers include quiet operation, small size and fast heating. This is the only convector in the TOP, which is equipped with an air ionizer. Wheels are provided for ease of movement. The device is connected to a 220/230 V household network, so it can be installed in any apartment. Among the shortcomings - a small power and poor design of the legs, because of which the convector is unstable.
The best electric wall mounted convectors: price - quality
4 NeoClima Comforte T2,0
A country: Greece (produced in China)
Average price: 2 990 rub.
Rating (2019): 4.5
The cheapest convection unit in the category, the NeoClima Comforte T2.0, is another example of the optimal combination of price and quality available in the vast domestic market.With the ability to control power, it is able to generate up to 2000 watts of thermal energy, giving them up to regular 25 square meters of living space. Most often, its services are used by people who spend most of their time in country cottages or in apartments as an addition to the existing central heating.
Despite the bulky design, the weight of which is 5.3 kilograms, NeoClima Comforte T2,0 has good ergonomic performance. This is achieved due to the presence in the design of the wheels, allowing you to move the installation without the need for lifting. A small nuance of the system is that the control in it is mechanical, in fact, the most primitive (compared to the electronic interface). But the protection levels were pleasantly surprised: there is both moisture protection, automatic shut-off when overheated, and antifreeze circuit that does not allow the elements to “freeze” when the temperature drops sharply.
3 Noirot Spot E-3 2000
A country: France
Average price: 5 690 rub.
Rating (2019): 4.4
The Noirot Spot E-3 2000 occupies the next place in the ranking of the best convectors for an apartment. This is the most expensive model among those presented in TOP, but it boasts good build quality and 2000 W power, thanks to which it is able to heat a room of up to 25 square meters. A distinctive feature of this device is the presence of a thermostat that allows you to maintain the temperature automatically at a given level. Convenient frost protection function will prevent freezing of the room and premature failure of the convector. Also, the distinctive feature of the Noirot Spot E-3 2000 convector is that it is produced in France and not in China (like most other convectors).
In numerous positive reviews, customers talk about fast heating, ease of operation and quiet operation. In addition, the device has a thickness of only 8 cm, so that when mounted on the wall will not stand out much. The moisture-proof case protects the insides from the ingress of water. Among the minuses - a short power cord and the absence of a sleep timer.
2 Electrolux ECH / AG2-2000 T
A country: Sweden
Average price: 3,890 rubles
Rating (2019): 4.9
Of course, the most beautiful and elegant wall-type convector from Electrolux, consuming and delivering 2000 watts of power (i.e. having an efficiency of ≈99%). Despite the modest cost of the action, the ECH / AG2-2000 T is enough to quickly heat rooms up to 25 square meters, so the model can be widely used for installation in a private house, apartment, or even in a country cottage.
According to experts, the undoubted advantage of this convector is the absence of secondary (but important in its own way) functions, which significantly reduce the overall reliability of equipment by 10-20%. From the point of view of consumers, this may seem to be a disadvantage, but at the operational level it is an obvious advantage, which gives a technique 1-2 years of additional functioning. Among other things, the Electrolux ECH / AG2-2000 T uses a monolithic Hedgehog heating element (ensures uniform heating and heat transfer), as well as two levels of protection (from excess temperature and moisture). Great set for a small fee.
When choosing a convector it is necessary to pay attention to the following characteristics:
- Powerwhich is calculated by the ratio of each 1 kW per 15 square meters. The formula works at wall heights up to 2.7 m. Each subsequent 10 centimeters require an increase of 10% power.
- Protection from overheating, freezing or overturning. Important functions that will be particularly relevant for country houses and cottages, where constant supervision of the convector is not always possible.
- Type of thermostat. All convectors are divided into two large groups: with built-in electronic thermostat or mechanical.
- Electronic The thermostat is optimal in the case when precise (up to hundredths) temperature setting is required, as well as silence of the working process. Its main drawback is the high cost, which is why it is installed only on convection heaters of the highest levels of the segment.
- Mechanical The regulator is a cheaper and more reliable analogue of the electronic temperature control system, widely used in convectors of the budget (and partly middle) segment. The main disadvantage of this type is the impossibility of precise temperature setting.
In addition, experts give a number of tips related to the peculiarities of the operation of convectors in domestic conditions.
- So, when choosing an installation for your apartment or house, you need to purchase those models whose maximum heated area is obviously higher (by 20-25%) than the dimensions of the rooms. In other words, for a room of 15 square meters, a convection heater should be purchased, designed for heating 20 square meters.
- Be sure to consider a number of important nuances regarding the installation of convectors:
- Do not place the wall convector under the electrical outlet, so as not to provoke insulation breakdown;
- Eliminate the factors of intense dusting of the room in which the convection heater is located - in such conditions, the system will certainly work less than the warranty period;
- If there are no wheels on the floor convector, be sure to build a blown stand for it, so as not to hinder the intake of cold air from the environment.
1 Ballu BEC / EZER-1500
A country: China (produced in Russia)
Average price: 2 690 rub.
Rating (2019): 4.8
The leader in rating of the best wall-mounted heating convectors is the Ballu BEC / EZER-1500 model. The cost of this device is somewhat lower than that of competitors in the TOP, but it is absolutely not inferior to them in performance. The power of the device is 1500 W, which is enough to heat the room up to 20 square meters. To create a favorable microclimate there is a temperature control. The convector will turn off automatically if it overheats or overturns, so you should not worry about safety.
In positive reviews, customers talk about quiet operation, convenient electronic control and good build quality. In addition, the device is installed ionizer, which creates a feeling of freshness. To save space, the device is compactly mounted on the wall. The moisture-proof case reliably protects the internal mechanism from water hit. The weak sides of the model include a short power cord and clicking while the thermostat is working.
Video Review
Top gas convectors
The principle of operation of gas convectors is practically no different from the operation of electric models, only the air heater is a burner. For the operation of such an apparatus, it is required to supply gas and organize the removal of combustion products. However, these devices are much more powerful than their electrical counterparts and can heat much larger rooms.
4 Bartolini Calorama SSI 4500
A country: Italy
Average price: 15 900 rub.
Rating (2019): 4.5
Compact convector gas type, designed taking into account the design subtleties for any interior. With its high efficiency, Bartolini Calorama SSI 4500 produces 4200 W of thermal energy, which is quite enough for effective heating of air in rooms up to 45 square meters.
The convector works only from the main natural gas, therefore, it will be inappropriate to use it in non-gasified areas (or expensive because of the system and retrofit of the system). Also noteworthy is the fact that the model is completely independent of electricity, which consumers like very much: in this case, the ignition of the burner is caused by the use of a piezoelectric element. In general, Bartolini Calorama SSI 4500 is in quite good demand in Russia, mainly from owners of private houses in the city.
3 Gorenje GH 6201
A country: Czech
Average price: 16 500 rub.
Rating (2019): 4.6
Gas convector is not the most aesthetic appearance, the installation of which is advisable in the conditions of heating the vast areas of a private house or cottage. Possessing an efficiency of around 87%, the Gorenje GH 6201 provides up to 4.2 kW of thermal energy, discharged by convection currents.
It is clear that to ensure stable operation and minimize the risk of accidents, the convector must have a number of protective and structural features. And, as stated by user reviews, in Gorenje GH 6201 these measures and conventions are fully respected. The heater control panel has a thermostat, a start button, electric ignition and a thermoelectric type fuse (to shut off the gas and automatically turn off the convector if the burner is extinguished). Like all other gas installations, this model can be installed exclusively on the walls, and, preferably, on the carrier or reinforced. The model is worth a lot, but with respect to other applicants, the category most closely meets the optimal price-quality ratio.
2 Karma Beta Mechanic 5
A country: Czech
Average price: 24 980 rub.
Rating (2019): 4.6
Karma Beta Mechanic 5 occupies the next place in the rating of the best gas convectors. The power of this productive device is 4.7 kW, so that it can be used to heat rooms up to 50 square meters. A closed combustion chamber ensures safe operation and the steel heat exchanger heats the air quickly. Wall mounting greatly simplifies the installation process - the convector takes up minimal space.
The advantages in the reviews, users include a wide range of temperature control, quiet operation and high efficiency. The device is equipped with piezo-ignition, which allows its use without electricity supply. Both natural and liquefied gas can be used as fuel. The weaknesses of this convector are large dimensions (weight 30 kg) and poor-quality assembly.
1 Alpine air NGS-30
A country: Turkey
Average price: 17 820 rub.
Rating (2019): 4.7
Not bypassed the rating of the best gas heating convectors and Alpine air NGS-30. This gas model has a capacity of 3.75 kW, which allows it to heat rooms up to 40 square meters. The design of the apparatus is such that the burner heats the air, and not the coolant, which allows minimizing heat loss. It is possible to set the temperature to 38 ° C.
Among the strengths of the model in the reviews, buyers note piezoelectric ignition, good packaging and convenient mechanical control. Combustion products are discharged through a coaxial pipe, which is supplied. In order to ensure the independence of the convector from gas communications, the possibility of working with liquefied fuel is provided. The disadvantages include high temperature exhaust gases and the absence of a fan.
Best premium electric convectors
Premium electric convectors are not only distinguished by increased cost, but also improved performance. Such models have more power and heating area. Eminent manufacturers, who value their reputation, offer more reliable and durable heating devices that serve faithfully to customers for a long time.
3 Noirot Spot E-5 2000
A country: France
Average price: 11 300 rub.
Rating (2019): 4.8
High-quality French convector of the premium segment, the popularity of which is ensured by good heating indicators. With a nominal power of 2000 W, the Noirot Spot E-5 2000 is able to heat the rooms of apartments and private houses of up to 25 square meters. Moreover, the user is free to choose the option of placing himself: the heater can be fixed on the walls or based on the wheels for movement.
According to user feedback, this model is quite advanced in its class. Despite the absence of a wi-fi module (or Bluetooth system) for remote control, the convector interface is electronic, so the temperature is controlled via the display.Adding to this waterproof housing and protection from freezing, we get a great option for an electric heater to equip cold rooms.
2 Ballu BEP / EXT-2000
A country: China
Average price: 7 390 rub.
Rating (2019): 4.9
A characteristic feature of the BEP / EXT model convectors from Ballu, a Chinese company, is its magnificent exterior design. Which, in aggregate with a low acquisition price, makes them one of the leaders of the domestic market in terms of consumer demand. The undisputed leader in sales is a 2000 W heater, with a two-stage heating controller and the possibility of effective operation in areas up to 25 square meters.
Among its indisputable advantages is the equipment with a large number of additional functions, such as light on / off indication, electronic control interface with display, remote control and heating timer (designed for 24 hours). Due to the equipment of the glass-ceramic panel, the Ballu BEP / EXT-2000 weight exceeded 7 kilograms, but this nuance is nothing compared with the organic appearance, especially since the set of wheels is responsible for the convenience of moving the unit.
1 Nobo C4F20
A country: Norway
Average price: 10 350 rub.
Rating (2019): 4.9
The electric convector of the Nobo brand has established itself as a highly reliable heating device, which is confirmed by numerous positive reviews. This model is recognized as the leader of user voting. The popularity of this convector is due to the outstanding characteristics of the product, in particular the quiet operation, high power (2,000 W) and a large heating area (25 m2). Provides protection from moisture and overheating. A feature of the convector is the possibility of both floor and wall mounting. A nice bonus for customers is a five-year warranty. Among the shortcomings, users note frail regular legs, which require replacement with better ones.
Advantages:
- reliable convector with protection against moisture and overheating;
- high power;
- large heating area;
- noiselessness;
- wall and floor installation;
- 5 years warranty.
Disadvantages:
- sickly regular legs;
- high price.