Top 10 Cooling Stands

Computers have become commonplace and almost any buyer can afford a laptop, albeit inexpensive, but quite suitable for work, study or leisure. Modern models are becoming more compact, which allows you to carry them with you literally everywhere. The exception is the game models, which are not particularly traveling.

Each laptop has a cooling system and despite all the tricks of the manufacturers, under heavy loads, laptops begin to warm up and go to throttling. Careful maintenance, regular cleaning and replacement of the thermal interface will help, but sometimes this is not enough, especially in southern latitudes, where there are constantly high temperatures. The cooling pad will help to partially solve the problem and we have collected for you the top 10 best and running models.

Top 10 best laptop cooling pads

10 DEEPCOOL N1 Black

If you are not chasing after the lights, additional bells and whistles and you only need efficiency, then the N1 Black is created for you. The back side is made of glossy plastic, and the front of the metal mesh. By weight, there are no special complaints - you can safely carry the model with you, as long as there is a place.

The giant size of the fan successfully copes with its tasks, or rather - 180 mm. Such dimensions allow not only to create an impressive air flow, but also to work relatively quietly in the range from 16 to 20 dB. The device connects to the laptop via a single wire, which can be fixed in special slots around the turntable. An additional USB is recessed into the plug itself, which cannot boast of a high data transfer rate, but you can plug in a USB flash drive and transfer documents through it. The tilt of the stand is adjustable, and all 7 rainbow colors are available for selection. Simple, aesthetically pleasing and most importantly cheap. It is one of the most durable models on the market, requiring a minimum of maintenance.

9 Trust GXT 277

Despite the prefix "Gaming Series", it is difficult to call such a cooling pad. Of the game in it, only perhaps the appearance and there is no fault in it - a black rectangular case with white elements around the periphery and a single, but large, red fan. When unpacking, you will be waited for instruction in various languages, including Romanian, Bulgarian and many others.

“Where are the USB ports?” – I thought the manufacturer and completed my brainchild with 2 ports for flash drives and other peripherals. All this stuff is located on the right side of the case. There is also a button to activate the gadget and adjust the mode of operation.

8 Orico NA15

Simple and no frills cooling pad for small notebooks up to 15 inches. Made in the classic black and white style. It can be used as a stand with passive and active cooling. The adjustment is simple - you do not want to bother, just put it on the table and use it on health. The body is aluminum and absorbs heat well.

The second option requires a little more body movements. In the delivery set there are two fans connected in one cord with a USB connector for connection. Both turntables you can put as you please, the benefit of the mesh design allows you to roam the imagination to the fullest. Owners of laptops with sleek cases need to be especially vigilant - at one point, your laptop may just start to slip.

7 DEEPCOOL MULTI CORE X8

Good quality, good price, good design, but there is no former X6 gloss in it. The model is made in a mesh style, which, according to the manufacturer, provides the best air circulation. 4 fans are located in each of the grids, and the resulting area is enough to install 17 inches. The speed of rotation of the turntables is 1300 revolutions per minute. The main material of execution is aluminum, which is a good means for additional heat absorption.

On the side there are 2 USB ports. Next to them is placed the tumbler adjustment mode. The noise level is average and is 23 dB. Some exceptional features of the stand is not observed. In general, it is a good working machine with high quality blowing.

6 Cooler Master NotePal U1

NotePal U1 is presented in the form of a curved metal plate with perforations on 95% of the surface. This allows you to ensure the maximum flow of fresh air to regular laptop coolers. The metal itself is a good conductor of heat, and hence the dispersion will be on a level. Three large rubber inserts prevent slippage. The bottom, moreover, goes to the back side to prevent slipping on the table. Also, the stand can be used as an additional protection of the laptop when carrying it - it has been inserted inside and bends and twists will no longer become a problem for expensive electronics.

If passive cooling is not enough, you can use a complete fan. It is small, but thanks to the design of the stand it can be fixed directly under the ventilation inlet of the laptop. It remains to add that NotePal U1 is designed for use with laptops up to 14 inches.

5 Titan TTC-G25T / B4 Black

The model with the TTC-G25T / B4 index looks boring from the competition. Plastic in the base, perforated elements in the center - it seems that we have already seen all this somewhere. The white version is much more fun. Plastic looks less elegant, but more practical, and the grid is much smaller than in the black version. The design does not depend on color. It is not foldable, and therefore it is inconvenient to carry it along with the laptop. In addition, the angle of inclination is not regulated at all. There are 4 USB ports on the back side, which is very good, since often most of them have only 2 of them. One of them will always be occupied by the power cable, which is also a USB hub.

With additional cooling, your laptop will provide a 200 mm fan with adjustable speed. Large diameter coupled with low revs ensures low noise in any operation mode.

4 Espada 336

Perhaps the most unusual model in the ranking. Despite the folding design and the statements of the manufacturer, it is difficult to name the Espada 336 compact. You can disassemble a table except for storage in a cramped apartment. You can also find fault with the absence of any kind of forced ventilation. Although the box has an image of a cooler.

Table-stand is quite convenient, since the height and angle can be adjusted in a wide range. The manufacturer added a separate mouse stand, which makes ESPADA a unique product of its kind. The stops for the laptop can also be adjusted depending on the size of the device and your preferences. The manufacturer added a separate pad for the mouse, which no other stand can boast. Finally, one of the main pieces is a retractable cup holder! The model is suitable for laptops up to 15 inches.

3 Crown CMLC-206T

Talk about the design of the bronze medalist for a long time will not work. The only thing that the user sees is a fine-meshed mesh with edging made of simple-looking blue plastic. The side and front edges are fading away, and therefore they are practically invisible. There are 2 USB ports at the back - one for uninterrupted power and the other for the user's needs. There is also a power button. WITHat the bottom, in addition to the legs for adjusting the angle of inclination, there are 7 fans at once and a number of holes for additional blowing around the perimeter.Coolers are visible from the front only when the backlight is on. When installed on a laptop stand looks good.

To cooling also not to carp. The already mentioned 7 fans with a diameter of 70 mm cover almost the entire area, which means that regardless of the location of the ventilation holes on the laptop, they will be above the cooler and well blown. There is a downside - noise. Small propellers need to spin faster to ensure adequate blowdown, which creates more noise.

2 DEEPCOOL N2000 IV

Silver medalist fit to give a medal for the design. The base of the stand is a long curved tube with anti-slip rubber in some places. You can't put this on your knees, but it looks stylish on the table. The main part is represented by a plastic container for two 140 mm fans. On top, everything is covered with a fine-meshed grid through which the cooling system is clearly visible. Due to the relatively low speed - 1000 rpm - acoustic comfort is not disturbed.

The manufacturer claims that the noise level is 25.1 dB. For comparison, the volume of a normal conversation is 40 dB. The maximum diagonal of the installed laptop is 15.4 inches.

1 DEEPCOOL MULTI CORE X6

Having a staff of creative designers, DeepCool has released an unusual kind of cooling pad in the form of a butterfly. Each of the coolers is located in its section, and a niche is left in the center to add extra rigidity to the design and conveniently route the power cable to any USB port. The basis of plastic, steel grating. There are legs for lifting above the table. The stand in the folded state is quite compact, which allows you to easily carry it in a bag with a laptop.

It is completed at once with four fans - 2 on 140 and 120 mm. Each pair can be switched on independently of each other using the knob on the side surface. Also, if necessary, include all 4 coolers for maximum cooling. The noise from the X6 does not exceed the sounds emanating from the cooling systems of average laptops.

How to choose a cooling pad?

In fact, everything is very simple - take the cheapest model with a large fan and do not get fooled by the backlight or additional bells and whistles. Efficiency is not add, and the price will increase. Stands are a purely utilitarian thing and you shouldn’t pay special attention to the appearance if you are not an esthete.

Popular vote - Who is the best manufacturer of cooling coasters
We vote!

Coolermaster

Deepcool

Titan

Espada

Crown

Trust

Orico

Total votes: 150

Vote results