Top 10 Cellular Amplifiers and the Internet

Despite the rapid development of cellular networks, problems with receiving a signal are quite common. There are many reasons for this: a weak phone radio, thick walls, complicated architecture, the use of metal or granite in facing a building, distance from a base station, etc. If it is impossible to eliminate them, and you can’t do without calls and mobile Internet. the outside world will help the electronic device, which is called - cellular signal amplifier.

Top 10 best cellular signal amplifiers

10 Telestone 950

The GSM 3G repeater of the Telestone 950 signal is one of the most affordable on the market. It is used to improve cellular communication and mobile Internet in the presence of a sufficient number of frequency channels in the 900 MHz range. Recommended operating area - 100-200 square meters. m., and the house or cottage where the amplifier will be installed, must be heated.

Surprisingly, the package, which cost is equal to the price of the most inexpensive repeater of the brands presented below, includes not only a repeater with a network adapter, but also both antennas, fasteners and a 10-meter cable. Thus, all that is required of the user is to take out and fix the external antenna on the roof or wall of the building, install the internal module, lay the RF cable, install the amplifier into the system and power it from the 220V network.

9 AnyTone AT-400

The AT-400 repeater perfectly proved itself in dense building conditions, lowlands, metal garages, etc. Miniature, weighing only 300 g and the size of a cigarette case, low-power (3.2 mW) and inexpensive, it is designed to enhance cellular communications in a limited space. In theory, its coverage area is 20 square meters. m., but in practice it does not exceed 10. Thus, it is preferred to use it outside the city, in the country, in the car, garage, small office.

The device is designed to create a sustainable cellular communication through CDMA-phones. The frequency range of the received and sent signals ranges from 890–915 MHz. The package includes both antennas, antenna wire with a length of 9 m, 220V power adapter. The device is equipped with a function of protection from spurious signals, is provided with warranty and service support from the manufacturer, which, by the way, is considered one of the most experienced in the field of telecommunications systems.

8 Vector R-610

Radio frequency device R-610 opens an updated line of amplifiers of the Korean brand Vector-Radio, known to most users of the same name walkie-talkies. The GSM repeater is designed to eliminate radio-shadow zones and compares favorably with previous versions with the presence of the UpLink and DownLink adjustments.

By installing the main unit, the installation of which is possible in the home, you can use a mobile phone on the standard 900 MHz radio channel in the usual mode. Powerful reception and transmission of the signal by the repeater provides a confident communication room of up to 300 square meters. The device is certified and passed tests, which confirmed the absence of radiation harmful to humans and the safety of operation.

7 Everstream ES1821P Kit

The kit ES1821P is assembled on the basis of a 2-band repeater with a power of 100 mW and a frequency of 1800/2100 mHz. The device is equipped with a LCD-display and a touch-sensitive control panel and is capable of independently reducing the gain when an excessively strong signal is received. In addition, the possibility of manual correction in increments of 1 dB is required when installing and setting up the amplifier. Convection fans, which are responsible for the prevention of overheating, are built into the case.

Other technical characteristics of the system are also very curious to the end user: its installation is simple due to convenient mounting brackets, the gain level reaches 60 dB, and the coverage area is 250 square meters. m. This is enough for the full amplification of cellular communications and mobile Internet in the apartment, cottage, industrial premises, underground parking, etc.

6 Ramo Orange-900

The conversation without cliffs on 75 sq. M. m around and long work of the smartphone on one charge - this is the effect that occurs after installing the Orange-900 amplifier. The device belongs to the Orange series and supports the 2G-standard GSM-900, while the older Plus model works with 4G (LTE) 2600 MHz. Manufacturer - known in Russia, Saratov Electromechanical Plant, whose products are actively promoted in federal retail chains and is popular among users.

The device is made of high-quality plastic and components mainly domestic suppliers. Aesthetically attractive and compact, its indoor unit fits easily into the interior of an office space, living room or cottage, and the outdoor antenna has magnetic hardware and is fixed on any metal object on the wall or on the window window. The gadget is designed to service only 4 subscribers and works only where there is at least a minimum input signal.

5 Baltic Signal BS-GSM / 3G-75

BS-GSM / 3G-75 is a domestic production booster to increase the strength of the GSM and 3G signals, operating in two bands: 900 and 2100 MHz. Absolutely all operators own a network of transceiver equipment operating in these frequencies, so the device owners do not have any problems with the quality of cellular communications and mobile Internet. For the assembly of the amplifier complex, it is necessary to additionally purchase 2 antennas and 2 cables and spend another 5,500 rubles.

Thanks to decent power ratings (500mW) and KU (75dB), the amplifier covers over 1500 sq.m. For safe interaction with the operator, 2 fast-response AGC and ALC circuits are built in, which are responsible for the automatic control of the G-factor depending on the incoming signal power. The radio is enclosed in a compact metal case, which eliminates overheating of the board or its damage by mechanical action.

4 PicoCell 900 SXB +

This amplifier is the result of the efforts of design engineers and assemblers of the Moscow Microwaves research and production company. Its customers today are such powerful enterprises as RosKosmos, SberBank, MTS, etc. But the range of cellular communications has solutions not only for large corporate clients, but also for individuals, residents of towns and cities, where often The signal is lost and the mobile Internet does not work.

The installation site of the model 900 SXB + is a country house, a summer house, an office and other buildings with a size of no more than 150 square meters. m. Adjustable power (50 mW) and gain (65 dB) is enough to connect several internal GSM antennas. Users note that this is not a professional device, but it is equipped with a mini-computer that controls the operating parameters and monitors the modes. There is also a power LED indicator and communication quality indicator.

3 KROKS RK1800-60

The KROKS RK1800-60 model belongs to the boosters of the initial price range, however, if there is a reliable signal in the area of ​​the external unit, it perfectly solves the problem of constant GSM-and LTE cellular communication failures. Coverage area is limited to 200 square meters. m., and the manufacturer recommends its use in cars, small apartments and cottages.

The repeater is equipped with indicators that allow you to identify and timely eliminate the "looping" of the signal. There is also an automatic gain control system, and for more precise adjustment - manual control. So the manufacturer warns the occurrence of interference in general for all subscribers of the radio channel and thus protects its customers from administrative penalties.

2 DalConnection 3Gboost

Unlike standard amplifying systems, 3Gboost consists of only 2 active components: a receiving unit and a coverage module with a built-in internal antenna. They are connected by an RF cable with a length of 20 m (for analogs of 10 m) and are made of high-quality components, thereby achieving an optimal signal-to-air noise ratio. The device is single-frequency and supports all operators working in the 3G UMTS 2100 standard. The field of application includes residential and industrial buildings remote from the base station, summer cottages and summer cottages of up to 500 square meters. m

The amplifier is designed for the end customer, is equipped with everything necessary for installation, which does not provide for the availability of special skills and tools and lasts 1 minute without exaggeration. Connected equipment independently controls and adjusts power to remove interference and stabilize the signal transmission level. The organization of the mobile Internet is provided wirelessly to any 3G device, be it a tablet, laptop, smartphone or modem.

1 Vegatel Titan-900 PRO

The Vegatel brand is well known to subscribers of cellular networks, who often offer its amplifiers at a special price. Production is located in the Moscow region and is based on the Ekomash plant. The wide range includes equipment for signal amplification in all existing ranges. If it is necessary to improve the radio signal in difficult conditions (large area, far distance to the base), the most popular product is the Titan-900 PRO kit.

The popularity of the device is due to its properties: manual and automatic regulation within 15 and 20 dB, maximum gain (up to 70 dB), shielding indication and increased area of ​​operation (1200 sq. M.) Completion of the most complete, nothing - even adapters and fasteners - do not need to be re-purchased, and the instructions, according to users, describe in detail the mounting algorithm.

Popular vote - who is the best manufacturer of cellular signal amplifiers and the Internet
We vote!

Telestone

AnyTone

Vector

Everstream

Ramo

Baltic Signal

Picoell

KROKS

DalSvyaz

Vegatel

Total voted: 18

Vote results