10 best tools for decarcling piston rings

The low quality of fuel and engine oil with constant use affects the engine performance. This is especially noticeable in the combustion chamber, where these two consumables are found. As a result, under the influence of high temperatures clogging of the oil wiper rings occurs with carbon and resin, followed by coking. Fully remove these formations can only be disassembled engine for flushing, or in a timely manner using highly active chemical means for the refining.

This review presents the best products for restoring the functionality of the piston group without the need for disassembling the engine, which significantly reduces financial costs (dozens of times!). The rating position is based on feedback from specialists and owners who have successfully used one of these tools in practice.

Top 10 best tools for decoupling piston rings

10 Romet

To restore the mobility of piston rings and remove high-temperature lacquer and carbon deposits, you can successfully apply the chemical highly active component of the Russian production "RiMet". This tool refers to high-speed hard decarcoons and poured into the cylinders through the hole for the spark plug or nozzle (in diesel ICE). The composition of the mixture actively destroys the structure of tar-carbon deposits and soot, in oil scraper and compression rings, as well as on the walls of cylinders.

In their reviews, many owners recommend cranking the engine with the ignition off for better processing efficiency. At the end of the procedure, the internal combustion engine warms up for 15 minutes. After the replacement of engine oil is necessary, otherwise "RiMet" can damage the engine seals. For this purpose, the use of flushing additives of the same brand is provided. It is noticed that after processing the parts of the cylinder-piston group, the effectiveness of anti-wear revitalizants increases. To increase the life of the motor manufacturer recommends using this tool on an ongoing basis, carrying out processing every 20-25 thousand kilometers.

9 FENOM DeCoker

Despite the affordable price, the FENOM decoder can decorate lacquer and sludge deposits in the piston group. Many car owners who have applied this tool in practice, strongly recommend increasing the processing time 4 times the manufacturer-specified interval. This will allow to return the mobility of the oil wiper rings and soften the deposits in the piston channels. In the process of processing, they will be cleared when the engine is scrolled without spark formation. Upon completion of the procedure and warm-up of the internal combustion engine (up to 15 minutes at a speed not higher than 2000), the engine lubricant should be replaced with the subsequent cleaning of the oil system with flushing fluid.

In the reviews of the owners who applied FENOM Decoker, the achievement of the goals is noted. Even in advanced cases, improved engine dynamics and reduced fuel consumption were observed.The engine stopped “eating” the oil, and the compression over the cylinders leveled off. However, the tool can not always provide the desired result - if the owner is late in processing, and the wear of the oil wiper rings has reached critical values, repair work cannot be done. In all other cases, efficiency has been recognized by many users. In their opinion, the regular use of the tool (an affordable price allows it to be done by almost all car owners) significantly increases the life of the engine.

8 Greenolanimator

One of the toughest, but effective decoilers. It requires responsibility and care in the application, because deviation from the manufacturer's instructions can cause unwanted processes in the engine. The highly active composition of the agent cleans not only soot and frees the rings of the piston group from coke sludge. It can easily destroy the seals in the oil system, so after use it is required to immediately carry out the procedure of washing and changing the lubricant.

In this case, it is better to perform cleaning with a special oil, and not just another additive. Judging by the reviews, the neglect of this rule leads to disastrous consequences - chemical washing does not neutralize Greenol-Reanimator compounds, and together with the mobility of the oil wipers, the paint can dissolve on the inside of the pan (if it is not aluminum).

7 Titanium

This tool is one of the quick decoupling and tested in practice by many users. In no way inferior to the best cleaning additives presented in this rating. At the same time there is an undeniable price advantage. Titanium is able to restore and equalize the engine compression, thereby prolonging the life of the composite parts of the cylinder-piston group.

Restoration of the mobility of the oil wiper rings cannot replace the overhaul of the motor, however, timely processing will prevent their premature wear and failure. If the coking process is not at a critical stage (when only disassembly and repair remains), Titan can significantly improve engine performance. To assess the degree of efficiency, the manufacturer recommends to carry out control measurements of the compression before the start of processing and after its completion. If the proper result is not observed or there is a partial improvement, it makes sense after cleaning and changing the oil (with pre-rinsing) to apply reducing additives.

6 ANTIKOKS VERYLUBE (XADO)

One aerosol can (330 ml) is enough to handle 20 cylinders - this is the most cost-effective means for the de-coking of piston rings. Effectively dilutes all possible types of deposits. It has an extremely simple way of use - by means of a special hose (supplied with a balloon) the active substance is sprayed into the cylinder through a candle hole. The whole process takes no more than 40 minutes. In this case, the bulk of the sediment is removed through the same candle hole - in order not to damage the paintwork of the car, they should be covered with a cloth when cranking the crankshaft.

The remains of softened coke and carbon are removed through the exhaust system - it is necessary to ensure engine operation for 15 minutes at high revs. At the same time close to the pipe is not recommended - too much "dirt" will fly out. Owners consider ANTIKOKS VERYLUBE to be one of the most effective and inexpensive ways to restore the functionality of oil scraper rings. After application, judging by the reviews of the owners, there is a clear improvement in the dynamics of the motor. The engine is quieter, without interruption, oil consumption is significantly reduced, and the compression in the cylinders not only rises, but also levels out between them. Traction power is also increasing.

5 Edial

Means for decarcioning piston rings "Edial" enters the combustion chamber with fuel - before processing, the owner does not even need to unscrew the spark plug. It is enough to pour the contents of the bottle into the filler neck and fill the required amount of fuel (you can handle both gasoline and diesel engines). The main advantage of this procedure is the absence of the need to change the oil and, of course, ease of use, available to almost all motorists.

After the mixture of fuel and highly active substance prepared in this way is developed, the mobility of the compression and oil wiper rings will be restored, the oil consumption will return to an acceptable level, and the engine will be pleased with increased acceleration and dynamics. In the reviews of users who have checked Edial in practice, special attention is paid to the smoothness of the changes that occurred during the processing. In this case, the tool has a cleaning effect on the nozzles of the injectors in the injection and diesel engines, removing plaque from them that has undergone multiple temperature treatment. According to the owners, “Edial”, although a simple but quite effective means, with regular use (every 10-15 thousand km) significantly postpones the need for overhaul of the cylinder-piston group.

4 Wynns Combustion Chamber Cleaner

The high-quality product Wynns Combustion Chamber Cleaner is able to carefully remove carbon deposits, lacquer coating and carbon slurry formations in the cylinder-piston group of exclusively gasoline engines. The tool restores the mobility of the oil scraper and compression rings, and in addition cleans the intake manifold with valves. Does not adversely affect the catalyst.

The unusual way of its use surprised many owners - a chemically active substance is fed through the vacuum hose of the engine. At the same time, its high efficiency is noted - in the reviews it is indicated that the compression in the cylinders is equalized, the motor vibration is reduced and detonation is eliminated. Also, many people pay attention to the minimum level of oil consumption and an increase in the capacity of the unit. In addition, the cleaning process does not require replacement of lubricant and almost can not harm the engine, because this tool is not in contact with the rubber seals of the engine.

3 GZOX INJECTION & CARB CLEANER

This tool, depending on the method of application, has the ability to clean the combustion chamber, decode the piston rings, or remove deposits in the carburetor. The chemical composition of GZOX INJECTION & CARB CLEANER provides instant dissolution of carbon deposits, resins and formations based on them and returns the mobility of the oil wiper rings.

Owners who have used GZOX INJECTION to restore engine performance, in their reviews, note the high efficiency of the tool - literally immediately after cleaning the motor returns to its former stability, its acceleration performance increases. As practice has shown, if the decoction is done according to the instructions, the result will definitely be positive. The lack of a recovery effect can only mean a mistake in diagnosis or indicate the fact that complete wear of the oil wiper rings has occurred. After applying a highly active chemical, the manufacturer recommends a thorough cleaning of the lubrication system and changing the engine oil.

2 Laurel ML-202

One of the most popular in the market pickup for piston rings is in great demand among buyers, because its quality is no worse than more expensive imported counterparts. The highly effective composition of this tool is able not only to restore the mobility of the oil scraper rings, but also to remove all types of deposits in the cylinder-piston group. Many owners recommend increasing the processing time from 2.5 hours to 12 hours for a greater effect, but this can lead to loss of tightness of rubber seals of the oil system. However, many motorists do this. In this case, immediately after the end of the procedure, it is necessary to replace the engine lubricant with preliminary washing, and it is better to perform this operation with a special oil, rather than an additive.

With proper processing, the deposit on the walls of the cylinders becomes loose and can be easily removed without disassembling the engine through a candle hole. When actions are strictly following the instructions, there is a complete disposal of coke deposits, blocking the normal functioning of the rings. And if their wear is not in critical condition, the result is sometimes fantastic! Judging by the reviews, the effect of the impact of "Lavr ML-202" can be compared with a major overhaul, only the cost of auto-chemistry is many times lower. The oil consumption drops sharply, the working pressure in the cylinders is leveled, and the engine itself becomes more responsive, and literally comes to life.

1 Shumma EX Engine Conditioner

One of the most convenient to use decoilers will not cause difficulties even for novice motorists. If the car mechanic strongly recommends making an overhaul of an engine-smoking engine with different compression in the cylinders, then with the help of Shumma EX Engine Conditioner it is possible to avoid this procedure and significantly save the budget. This is one of the most powerful means of restoring the mobility of oil scraper rings and removing any deposits in the cylinder-piston group.

It is best not to wait for the "dead" occurrence, but to perform a cleansing procedure at intervals of 70-90 thousand km. This will increase the life of the engine and delay overhaul indefinitely. After processing, the motor reduces vibration during operation, stops warming, its power definitely increases. Owner reviews also noted a decrease in smoke and lubricant consumption (in some cases, timely processing there is an almost complete absence of oil vapors in the exhaust), and fuel consumption is returned to the level of "fresh" car.

Popular vote - which brand offers the best tool for decoupling piston rings?
We vote!

Shumma

Wynns

Romet

FENOM

Greenol

Titanium

Laurel

XADO

Gzox

Edial

Total votes: 1

Vote results