10 best plasters

The most important building material was and remains plaster. If earlier the sole task of leveling the walls and ceilings was assigned to it, today compositions for tile, wallpaper, and painting have been invented. With the help of some types of plaster can decorate the internal and external bases. Replaced homemade composition of sand, cement and lime, came ready mix. Some of them before work, you just need to mix with water, while other products are ready immediately for application. The choice of suitable plaster depends on its purpose, which in turn affects the recipe.

• Plaster with gypsum bases have universal qualities. With the help of such mixtures, it is possible to carry out both rough alignment of walls and ceilings, as well as finishing. The disadvantage of gypsum-containing materials is the fear of moisture and frost.
• For the preliminary creation of a plaster layer inside and outside buildings, cement-based mixtures are suitable. They differ in reasonable price, possess resistance to weather influences, are characterized by durability.
• Achieve a perfectly smooth and even surface plaster based on synthetic resin. With their help, you can create decorated surfaces of exterior and interior walls, facades, and socles. However, the cost of such products is quite high.

Our review includes the best plaster made on different bases. The rating is based on reviews of professional plasterers and amateur decorators.

The best gypsum plaster

The most popular among builders are currently using plaster compositions based on gypsum. They are easy to prepare, apply and level.

5 Will base Gipswell

High level of vapor permeability has plaster Founding Gipswell. The gypsum-based composition is recommended for leveling the grounds inside buildings with low humidity. Plaster is versatile, it can be used to work ceilings and walls of any materials. Manufacturer added to the composition of polymeric additives that increase adhesion. After drying, a smooth and smooth surface is obtained. It is possible to apply a paint and varnish covering on it, to paste wallpaper, to lay a tile. Further shpatlevaniye is not required when wet mashing solution. Plaster is easy to apply and level.

Professional plasterer flatteringly speak about such qualities of plaster Founding Gipswell, as high vapor permeability, ease of application, reasonable price, the formation of a smooth surface. The disadvantages of the builders include unstable quality of the composition, too rapid drying of the solution.

4 Unis Teplon

Snow-white color has plaster plaster Unis Teplon. It is intended for finishing ceilings and walls inside rooms with a normal level of humidity for painting or wallpapering. The composition can be applied with a thickness of up to 50 mm without the use of plastering mesh. Use in a bathroom or kitchen is allowed at alignment of a surface under a tile.Due to the special recipe, the manufacturer managed to reduce the setting time of the plaster. The use of this material can reduce the cost of subsequent painting the walls or the ceiling in white. The coating forms a favorable microclimate indoors.

Domestic masters of interior decoration emit several positive qualities of plaster plaster Unis Teplon. It is plastic, affordable and moisture resistant. When drying forms a white surface. The disadvantages of the material is insufficient adhesion, which is why it is necessary to first prime the porous bases.

3 Ceresit CT 35

Decorative plaster company Ceresit favorably of high quality. It is intended for thin-layer deposition and is available in several colors. It is possible to apply structure as on the plastered surfaces, and on the concrete bases, and on the panel from a chipboard. The mixture can be used not only indoors, but also outside. Decorative plaster is recommended to be used when building facade insulation systems in combination with expanded polystyrene or mineral wool slabs. There are various modifications of the composition, for example, for painting or for winter use (up to -10 ° C). Material differs in shock resistance, resistance to ultraviolet, frost resistance.

Finishers flatteringly speak about such properties of decorative plaster Ceresit, as vapor permeability, frost resistance, resistance to negative weather phenomena. The downside of the composition is the high price.

2 Volma Canvas

Domestic plaster Volma Canvas is popular with decorators due to the optimal combination of price and technical parameters. It is made on a plaster basis with the use of unique chemical and mineral additives. Distinctive features of plaster are such properties as good water holding capacity, excellent adhesion, optimum drying time. The composition can be used for leveling ceilings and walls, followed by painting, laying tiles or wallpapering. After drying, the surface is smooth, which eliminates the filling operation.

Builders highlight in the reviews such strengths of Volm Canvas plaster as affordable price, plasticity of the working solution, ease of application. Of the negative qualities, there is a color heterogeneity after complete drying.

1 Knauf Rotband

The name of the plaster Rotband firm Knauf has already become a household name among builders-finishers. Mix on a plaster basis is intended for alignment of surfaces in buildings. The composition can be used to finish the walls and ceilings of residential premises, as well as in preparation for the lining of bathrooms and kitchens. Distinctive feature Rotband is the possibility of applying to any base, starting with concrete and ending with brick. Due to the introduction of polymer fillers and light additives into the gypsum base, high adhesion, simple application and large thickness (up to 10 mm) in one pass were achieved.

Domestic builders call Knauf Rotband the best gypsum plaster for interior work. Its advantages are in environmental friendliness, fire resistance, vapor permeability, high-quality adhesion. The disadvantages include only the high price.

The best cement plasters

Cement plasters are most often used at the stage of preparing walls, ceilings or facades before applying finishing coatings.Thanks to an affordable price, you can economically correct all the shortcomings that were made during the construction of walls and ceilings.

3 Glims Velur

Lightweight plaster Glims Velur finds wide application in construction. The composition is based on cement with the addition of perlite. It is intended for leveling walls, facades of foam concrete blocks, concrete, bricks and other materials. Due to the small weight of the plaster layer, it is possible to reduce the load on the wall and ceiling structures. It is possible to apply plaster in dry rooms, and also in a bathroom, kitchen, outside of buildings. In the course of drawing the plaster grid is not required, and it is possible to smooth down a surface to gloss. After drying, a weatherproof and durable layer is formed, which has elasticity and resistance to cracking.

Domestic finishers highlight such advantages of cement plaster Glims Velur, as easy application, simple alignment, versatility. Of the negative qualities often indicated cracking of the dried layer, the complexity of stirring.

2 Miners

At the most attractive price sold Russian plaster miners. The cement-based composition is intended for both manual and mechanized application of plaster. With this mixture, you can align the walls and ceiling inside buildings, as well as external facades. The plaster can fill cracks and grooves up to 60 mm deep. It is not suitable only for finishing surfaces that come into contact with food and drinking water. Thanks to good adhesion, different types of foundations can be leveled (brickwork, cellular and ordinary concrete, cement plaster). In the future, the surface can be applied finishing putty, decorative plaster, ceramic tile or paint.

Professional builders consider cement plaster miners an excellent budget option for finishing. It fits perfectly on the base, not dusty, suitable for a bath.

1 Ceresit CT 29

At the same time leveling uneven surfaces and producing plastering allows Ceresit plaster CT 29 (2 in 1). The composition has a cement base, in which polymer components and reinforcing additives are added. The mixture is recommended for use in the repair and leveling of concrete, cement-sand, brick foundations. With the help of plaster it is possible to quickly repair cracks, chips, gouges and other defects. Not recommended for leveling the floor. The composition has received special properties due to the introduction of microfibers, which play the role of reinforcing material. As a result, in a single pass, you can apply a plaster with a thickness of 2 ... 20 mm without using a grid.

Masters finishers positively speak of such qualities of cement plaster Ceresit CT 29, as manufacturability, convenience, efficiency. The disadvantages of the composition of specialists called the appearance of cracks during drying and high price.

The best plaster based on synthetic resin

Create a perfect finish coatings allow plaster based on synthetic resins. Masters are able to make with their help a luxurious finish.

2 Mapei nivoplan

Italian plaster Mapei Nivoplan has universal properties. It can be used to align internal and external surfaces, repair old plasters, prepare the base for tiles, etc. With this elastic composition based on synthetic resin, it is possible to apply a layer to the ceiling with a thickness of up to 30 mm. The material has a very good adhesion, which allows it to be used for finishing brick, foam concrete and wood-cement foundations. In the composition of synthetic resins are perfectly combined with fine sand and cement. The solution is easily prepared by mixing the dry powder with water. Plastic mass can be applied with a spatula or plastering machine. Not recommended for leveling floors, as well as for finishing gypsum-based bases.

Finishers point out a number of advantages of Mapei Nivoplan plaster. The main one is versatility, affordability and manufacturability. Unfortunately, the composition is far from being everywhere.

1 Caparol streichputz

The best plaster to perform structural facade work is the composition of the German Caparol Streichputz. The product is a matte plastic mass based on synthetic resin. The composition is suitable for the creation of thin and weather-resistant coatings. Plaster has a wide scope of application. With its help, it is possible to level the rough plastered surfaces, to apply a mosaic with a dusting, to imitate a graffiti. When using the plaster inside the premises, it is possible to obtain a very durable coating that is highly resistant to mechanical stress. The composition is diluted with water, it is environmentally safe, has a faint odor. Even with a large layer thickness after drying, the coating does not crack.

Builders especially like the process of applying Caparol Streichputz facade plaster, its strength and impact resistance. The main disadvantage of this product is the high price.

Popular vote - who is the best manufacturer of plasters?
We vote!

Knauf

Volma

Ceresit

Unis

Will base

Glims

Miners

Caparol

Mapei

Total votes: 135

Vote results