Welding without a protective mask is extremely dangerous and can cause irreparable harm to health and cause partial loss of vision due to burns of the cornea of ​​the eye. Therefore, you should not underestimate personal protective equipment, and the range of welding masks on the market allows you to choose the best option in accordance with the nature of the work and the purchase budget.

The review considers the best masks with automatic dimming “chameleon” of different levels and protection systems with a fixed light filter. All of them have been tested in practice and have the prevailing positive characteristics and reviews of the owners, which have become the main reason for the inclusion of models in the TOP of our rating.

The best welding chameleon masks for lovers

In everyday life, many owners have to use the welding machine infrequently. Therefore, the requirements for the mask are quite simple. It should reliably protect eyes from radiation during a short work.

5 CALIBE MOA-11

A simple and unpretentious welding mask-chameleon stands out in the TOP ranking with the most transparent glass - 3 DIN. Fully automatic darkening system operates on an electric arc for 0.25 ms, which is quite enough for effective eye protection.

Non-flammable plastic body mask protects the face and neck of the welder from splashes of molten metal. The mount is easily adjustable, a soft gasket reduces pressure on the frontal part of the head. It should also be noted that in most reviews the owners are satisfied with the quality of the system response, the duration of work from one set of finger batteries (it was possible to increase it thanks to the built-in solar panel) and the strength of the material from which the mask was actually made.

4 SPECIAL WM-300

Beginner welders and people with experience in this area will appreciate the next participant in the rating. The entry of "SPECIAL WM-300" in the TOP of the best masks of this category is justified by the lowest cost - it is cheaper to not find automatic protection on the Russian markets. The chameleon welding shield guarantees the protection of the wearer's eyes against arc blinding - only 0.15 ms will be needed by the automation to create a darkening in 11 DIN.

Of course, the price is the main factor in the popularity of this protective mask. However, in a review, none of the owners did not make negative assessments of the work of the WM-300. Rather, on the contrary, both the response time and the dimming level are extremely positive.However, it was not without flaws - the “chameleon” responds exclusively to the welding arc, and refuses to respond to the sun and even the incandescent bulb.

3 Interskol MS-400

Domestic development Interskol MS-400 has become the best budget mask with auto-darkening. In it adjustment of degree of blackout within 9-13 DIN is provided. The mask is equally convenient to work with welding machines of various types. The light filter is powered by a photocell and a lithium battery. The response time is less than 0.00006 s, which is less than the blink time of the welder. Remedy weighs 0.46 kg, can be operated at temperatures from -5 to +55 degrees. There is a three-stage sensitivity adjustment of the filter, the switch is installed on the inner surface of the housing.

Consumers in the reviews mention the advantages of the mask Interskol MS-400, as an affordable price, double power, quick response of the light filter, the presence of adjustments. The disadvantages include the small size of the viewing window, the need to remove the mask when choosing the optimal mode.

2 Foxweld Corundum 5895

The best welding mask for lovers with a minimum weight was the model Foxweld Corundum 5895. It weighs only 0.37 kg. The product is equipped with an automatic light filter that reliably protects the organs of vision from harmful radiation. The body is made of non-flammable plastic, it is highly durable. Due to the presence of dimming adjustment, the mask can be used not only for welding, but also for metal cutting or abrasive machining. For the timely change of the operating mode of the filter are two sensors. Power is supplied from the solar cell. In the light state, the degree of darkening is 4 DIN, and in the dark - 9-13 DIN.

Consumers compliment such qualities of Foxweld Corundum 5895 mask as lightness, good visibility, compactness. Just customize the product under certain working conditions. Of the disadvantages noted the rapid appearance of scratches on the glass from splashing metal or abrasive.

1 RESANTA MS-4

The RESANTA MS-4 face shield of a domestic manufacturer has perfectly proved itself when conducting short welding works, both by amateurs and specialists. It is made of durable plastic, which reliably protects the face and neck from sparks, besides, the headrest is easily adjustable in size. The glass of this welding mask is made according to the chameleon technology, thanks to which it reliably protects the eyes, regardless of the intensity of the process.

Adjusting to the brightness of the flashes, the glass itself adjusts the degree of dimming, which positively affects the quality of the review, making the work of the welder as convenient as possible. The speed of response to the arc in this case is 0.1 ms, and the recovery occurs with a slight slowdown, for the gradual adaptation of the eyes to ordinary light. This greatly facilitates the work of a specialist, since distracted by the constant adjustment of the welding mask. There is also an adjustment of the sensitivity level of the light filter. The maximum darkening indicator is DIN 11, which is enough for reliable eye protection against arc discharge.

The best welding masks chameleon for professionals

It is important for professional welders to keep their health in mind.The mask should provide reliable protection for all important organs, be light and comfortable.

5 Bison Expert 11079

The best domestic mask for professional welders in our review was the Bison Expert model 11079. The body is made of lightweight, durable, heat-resistant polymeric material. The chameleon filter has a dimming range from 9 to 13 DIN. In light mode, the light transmittance is 4 DIN. The size of the viewing window is 98x42 mm. The manufacturer provides a smooth adjustment of the fixing tape within the 54-62 size. The moment of operation of the protection is 0.00004 s. The built-in solar batteries and two replaceable lithium batteries ensure the operation of the light filter. Welding mask weighs 560 g.

In the reviews, welders point out such strengths of the domestic mask as fast automatic darkening of the window, low weight, compactness, convenient adjustment of the position on the head, good visibility. The disadvantage of the product is the inability to work at low temperature.

4 Zeus Master

The next participant who has entered the TOP of our rating - “Zeus Master” can boast the largest field of review. This welding chameleon mask is 9.5 x 6.2 cm, which is enough for a full view of the workplace. The regulators are ergonomically positioned with an automatic light filter system - they are located near the left temporal lobe and allow you to optimally adjust the triggering mode directly during the welding process.

The maximum blackout, which provides a protective mask-chameleon, is 13 DIN. Very convenient is the presence of the mode "Grind", in which the automation does not work. This allows, without removing the shield, to correct the parts to be welded with the help of a "grinder", which saves a lot of time for the welder. So consider in their reviews, users who have made their choice in favor of the “Zeus Masters”. Separately, there is a high accuracy of operation, which was achieved thanks to the 4th sensors of the welding arc.

3 ESAB Sentinel A50 for Air

Modern technologies used in the development process of ESAB Sentinel A50 for Air allowed to unite in this mask all the best qualities required in this type of protective equipment. Made in a unique design of durable nylon, with a very comfortable adjustable headband, it is able to provide complete protection when performing various jobs. Depending on the type of welding, in this model, you can select the desired level of shading in the range from 4 to 13 DIN.

The air supply ensures maximum safety and convenience when working with gas welding equipment. This is one of the best automatic masks - it has a darkening speed of about 0.04 ms, which excludes even the slightest possibility of blinding the operator. In reviews, positive statements often concern high quality workmanship: there are no flaws and curved joints - the mask material is durable and reliable enough. The chameleon system also demonstrates stability at work, fully justifying the cost of an ESAB Sentinel welding mask.

2 FUBAG ULTIMA 5 - 13 Panoramic Black

The best ratio of price and protective qualities is available in the Chinese mask FUBAG ULTIMA 5 - 13 Panoramic Black. Innovative development has a large viewing window of 100x93 mm, the body is made in 3D design. 4 optical sensors are built into the mask. Provides a smooth adjustment of glass darkness and sensitivity. The limit of the degree of darkening can be adjusted in the limit of 5-13 DIN, the regulator is placed outside the housing, which allows changing the settings in the process. And to adjust the delay time and sensitivity will have to remove the mask, because the switches are located inside the helmet.The electrical circuit is powered by photocells and two replaceable batteries.

Russian welders like the affordable price of the mask and its functionality. Professionals distinguish such advantages as a broad overview, the presence of a large number of settings, stylish design. The disadvantages include the internal location of some adjustments.

1 3M SPEEDGLAS 9100

The 3M SPEEDGLAS 9100 mask provides the most reliable protection to the welder. It is made using modern technologies. The product provides a range of protective services. The shield has a light filter with fast dimming, a well-designed mounting system, high-quality air exchange, a heat-resistant body. The mask is powered by a solar battery and a battery; there is a charger included for charging it. Convenient headband and light weight of 591 g makes the long-term work of the welder comfortable. For the timely change of parameters are responsible 3 arc sensor indicators. The degree of darkening is adjustable from 3 to 13 DIN.

Professionals in the reviews note the highest level of protection. In the 3M SPEEDGLAS 9100 mask it is convenient to work throughout the shift. Excellent visibility from any angle. The only disadvantage of the model is the high price.

The best welding masks with a fixed filter

To perform large amounts of welding (long seams, etc.), high-tech chameleon masks may not be entirely comfortable. In these cases, it is advisable to use protection with a constant light filter. In addition, some models are much cheaper than electronic counterparts. This category contains the best welding masks of this type.

5 Sibrtech 89122

One of the easiest ways to achieve convenience in a welding mask with passive protection is the presence of a folding unit. The best model in our review was the domestic panel "SibrTech" with a folding block of 110x90 cm. The ease of use, combined with the low price, make this protection one of the most attractive for amateur welders. The product saves the eyes from the negative effects of the light of the welding arc during operation. The body is made of polypropylene, the total weight of the shield is 550 g. The folding light filter has dimensions of 110x90 mm. The dimming ability of the glass is at 10 DIN. Welding mask meets the requirements of technical regulations and GOST.

In their reviews, domestic welders note such advantages of the SibrTech mask as user friendliness, low price, low weight. Among the shortcomings mentioned unreliable body, frequent failure of fasteners, the difficulty of fixing on the head.

4 Quattro Elementi Omega

Another rather convenient and practical welding mask made in China is represented in our TOP rating. The installed light filter in 11 DIN will protect the eyes from the arc discharge, and the durable plastic (polyamide) mask material reliably covers the welder's face and neck from the heated metal splashes. The traditional fastening with the help of the quick-release headband rigidly enough holds the protective shield in the desired position.

A special advantage of this mask is that in the moments between welding there is no need to lift all the protection - it is enough to slightly open the viewing window in which the light filter is installed. At the same time, for greater security (during other auxiliary work), the face of the welder will be protected by transparent tempered glass. In reviews, users Quattro Elementi Omega positively note this feature of the design, which saves time on the preparation of welding.

3 Amparo Katran

The welding mask is made of polyamide, thanks to which it reliably protects the head and neck of the welder from splashes of hot metal and sparks. The ability to install filters with varying degrees of dimming allows you to choose the most suitable option.Replaceable elements are included (from 9 to 13 DIN), which initially provides the user with all necessary. The headband of the mask in the forehead has a soft polyurethane foam pad, and a convenient mechanism allows you to fix it tightly.

In a review, owners find it difficult to say anything bad about Amparo Qatran. Screw clamp fastening the mask to the headband adjusts the shield in the most convenient position. A durable casing and a set of light filters made of tempered glass provide an adequate level of protection for electric arc welding.

2 ROSOMZ NN-3 Super Premier FavoriT (14)

In the top of our rating is deservedly includes the domestic model of the welding mask Super Premier FavoriT. A distinctive feature of this protective element is both the architecture and high-tech materials from which the mask is made - DuPont and Zytel. These components provide excellent resistance to physical and high temperature effects. With regards to the design, it is safe to say that it is one of the most reliable - it is this feature that brought ROSOMZ NN-3 to the second position in the rating in this category.

Panoramic polycarbonate glass is made flush with the main body of the mask and already under it, on the inside, the 14 DIN filter is hidden. Thanks to the well-thought-out layout, the welding mask has a high "survivability" and is characterized by a long service life, compared to other models. The RAPID head is conveniently fixed by a swivel ratchet that quickly adjusts the mount to the required dimensions. In reviews, among other things, the owners highly appreciate the presence of a removable shutter, which reduces the pressure from the weight of the mask on the user's head.

1 ESAB G30 Din 10

The best level of security is provided by the ESAB G30 Din 10 welding mask. It reliably protects not only the operator's eyes, but also his respiratory organs, bringing in air from the outside using a special pipeline. Actually the mask itself has a double construction. The main part with the air supply system completely seals the user's head from the surrounding space.

At the same time, the internal protective glass can be both completely transparent and with limited light transmission (2, 3, or 5 DIN). On top of all this design is another protective shield, complete with a 10 DIN filter. (2 or 8 DIN transmission elements can be installed). True, this whole set is purchased additionally, however with its help the scope of application of this mask is significantly increased, since by applying light filters a welder can be provided with a high level of protection up to 15 DIN. This allows you to perform a huge amount of work without a special load on the user's visual apparatus, which significantly increases the speed of assignments. Despite its high cost, ESAB G30 is the best choice for welding seams of metal structures with a large length.

Popular vote - who is the best manufacturer of welding masks?
We vote!

Interskol

Foxweld

SibrTech

SPEEDGLAS

Fubag

Bison

Quattro elementi

Amparo

ROSOMZ

ESAB

Zeus

CALIBER

SPECIALIST

RESANTA

Total voted: 136

Vote results