A place |
Name |
Feature Rating |
| 1 | ESAB A2 Multitrac | The best equipment reliability |
| 2 | Svarog MZ1000 | Stabilization of the input voltage. High quality weld |
| 3 | EvoSAW 1250-II | High welding speed. Universality of equipment |
| 4 | ADP-1000 | The best ratio of price and quality |
| 5 | Riland-Aurora PRO MZ 1250 | Long service life |
Welding tractor is a professional equipment that allows you to automate and greatly facilitate the implementation of large amounts of work on the welding of metals. The possibility of independent movement, both with the use of a special guide, and directly through the material significantly increases the efficiency of the equipment and reduces the time spent on the implementation of technical tasks.
The best rating of welding tractors that can be bought in the domestic market is presented in the overview rating. When choosing, both technical characteristics and recommendations of experienced specialists using welding units of this type were taken into account.
TOP 5 best welding tractors
5 Riland-Aurora PRO MZ 1250
Long service life
A country: China
Average price: 338 900 rub.
Rating (2019): 4.2
The welding tractor has a modular architecture with a separate inverter. The device can carry out submerged-arc welding in an automated mode, the effectiveness of which is expressed in a significant acceleration of the work process, which does not affect the quality of the weld. It can work over joints with overlap, butt and also perform angle welding. Movement is carried out both along the guide and directly along the material being welded. It is possible to adjust the position of the weld - it can be both inside the track and outside.
The welding tractor has a simple construction, which increases its reliability. Protection against overheating and voltage drops, high-quality forced cooling also positively affect the service life.
4 ADP-1000
The best ratio of price and quality
A country: Russia
Average price: 260 500 rub.
Rating (2019): 4.5
The welding tractor performs single- and multi-layer welding with welding over the electrode wire under the flux. A three-phase network connection is required. The software allows you to synchronize the speed of movement of the trolley and wire feed. The unit can move both along the surface of the material being welded and along a special guide. Control of the welding tractor can be remote. Through the remote control it is also possible to carry out a smooth adjustment of the welding voltage.
The working head is movable and installed at the desired angle to the surface. During the process, the convenience of visual inspection is provided by a laser beam marker. Stitches can be made with a rectilinear or ring technique. The equipment can apply overlapping seams, butt-weld (both with and without edge cutting), and at an angle (connection in “tavr”).
3 EvoSAW 1250-II
High welding speed. Universality of equipment
A country: Russia
Average price: 249 000 rub.
Rating (2019): 4.7
This self-propelled unit can perform automatic submerged arc welding, has a separate construction (inverter power supply and automated installation) and high speed: in one minute the welding tractor makes a seam from 10 to 15 cm long, depending on the metal thickness.
In addition, there is the possibility of using the inverter separately for air arc gouging (cutting the workpiece to a certain depth) or for electrode manual welding. The presence of a system of protection against overheating and short circuits allows you to avoid premature failure of the welding tractor, as well as to protect the working staff.
2 Svarog MZ1000
Stabilization of the input voltage. High quality weld
A country: Russia
Average price: 353 400 rub.
Rating (2019): 4.8
The welding tractor Svarog MZ1000 is designed to work with various metals with a thickness of 4 to 30 mm. High performance equipment allows the installation to be used in continuous production processes The stability of the adjustable output parameters of the current provides a smooth arc, which has a positive effect on the quality of the weld.
The welding unit has an internal scheme for stabilizing fluctuations in the input voltage, and for its connection a three-phase network is required. Modern controls and displays to display the set parameters greatly simplify operation. In addition, there is a memory for recording (up to 100 tasks) of the basic welding algorithms, which speeds up the process of setting up the equipment.
1 ESAB A2 Multitrac
The best equipment reliability
A country: Sweden
Average price: 1 100 000 rub.
Rating (2019): 5.0
Excellent welding tractor, when working under flux can use two wires at once (arc splitting). The prevention of air access to the weld pool can also be carried out with inert gases. By installing a special adapter, the unit can be used to perform air gouging with a carbon electrode. The thyristor LAF inverter used with the installation has a three-phase connection and provides high arc stability even at low voltages.
The accuracy of movement in the welding process along the connecting seam is ensured by the four-wheel drive of the trolley. The information display, convenient control, and the ability to program the operation of the tractor greatly simplifies the operational process. The equipment is of high quality assembly and used components, which determines the efficiency of operation even when working in harsh conditions.
