10 best mold remedies on the walls

Mold on the walls is a microscopic fungus that damages the interior, the health of the occupants of the room. The room with the fungus becomes dangerous to live because of the spores of microorganisms that are in the air and get inhaled into the body. There they settle, causing respiratory tract infections. Systematic ingress of spores of the fungus inside the body, sharply weakens the immune system, contributes to the appearance of signs of asthma, asphyxiation, and rapid heartbeat. It is not always possible to establish a relationship of weak immunity with the fungus on the walls, as patients do not attach any importance to this, and doctors do not ask such questions. Mold moves to furniture, clothing, carpeting. We have to spend money on new things, often to clean.

The fight against fungus is not easy, but the chemical industry offers many tools that successfully solve this problem. Selection precedes the identification of the causes of this phenomenon. The main ones are: high humidity, insufficient ventilation, the presence of voids in the walls, sudden changes in temperature inside and outside the room. After identifying the cause, pick up a means to destroy the black from the surfaces. To improve ventilation, it is enough to purchase a forced air exchange unit; voids can be filled up with special building materials, but not all causes can be eliminated by mechanical means. There are chemicals, the best of which are presented below.

Top 10 best mold remedies for walls

10 Biotol Spray

One of the best antibacterial agents for mold and mildew on mineral, wood and other surfaces. In the composition there are no heavy metals, mercury, chlorine, therefore there is a slightly perceptible odor of a chemical agent. Recommended for wet rooms, facades of buildings, basements, balconies, roofs. It is suitable for disinfection works on monuments of architecture, memorial plates and fences, it is used during restoration. The material of the work plane does not matter.

Strongly infected walls are recommended to clean before applying the tool with a brush or scraper. This should be done very carefully so as not to spread the infection to clean areas. It is best to spray the drug at the site of injury from a distance of 20-30 cm, not falling on closely spaced objects, which must first be covered with a protective film. The applied preparation is left for 1-2 days, cleaned with a brush of dirt and applied again in advanced cases. Instruments after application are advised to rinse under running water.

9 Belinka

The drug has a broad spectrum of action. Effectively eliminates various types of wall fungi and mold. Approved for use in rooms with high humidity.It helps in the shortest possible time to disinfect walls, floors, ceilings, attics, socles from pathogenic microorganisms. Designed mainly for concrete, plaster surfaces. The absence of bleaching components in the composition allows its use on multi-colored materials.

Begin treatment with solution preparation at a concentration of 1: 4. Spray or brush the drug at a temperature of +5 degrees and no more than 80% humidity. Removal of dried dirt is required only after the procedure. It is best to do this with hot water under high pressure. A large area of ​​contamination is the basis for re-treatment. After drying, apply a primer and then paint.

8 Neomid Bio Repair

One of the best disinfectants for the prevention and destruction of fungus and mold from surfaces in rooms. The formula of the drug is represented by safe components, which increases its popularity. Used in the construction of buildings to prevent the appearance of pollution. To destroy the existing lesion is available in two types - concentrated and ready-made solution. The first is used in diluted form in difficult cases and on a large area of ​​damage. In domestic cases, use ready-made solution. Both effectively eliminate the problem on mineral surfaces.

Work is best done at a low temperature - from +5 degrees. The surface is irrigated from a short distance, left for 2 hours and gently remove all contamination with a scraper, without scratching the treated area. If necessary, repeat the procedure. Cleared planes should not be left under precipitation. We must try to choose a time for work so that at least 12 hours the temperature would be between 16 and 20 degrees, and the humidity should not exceed 60%. The whole process is carried out in a well-ventilated building. Allowed to freeze no more than 5 times.

7 Abedis 06

It is used inside and outside the building, in separate outdoor gazebos, in greenhouses, on garden paths of different materials. The drug is considered a universal antiseptic. It is made in the form of an emulsion. It is recommended as a prophylactic against fungal microorganisms and mold. Effectively removes existing organic deposits. Abedis is recommended to be used as an additive in paints and solutions during construction. Suppose to work in children's institutions. The drug is based on guanidine, which is one of the most powerful antiseptics, and water as a solvent.

Before starting work, the product is diluted with water in a ratio of 1: 2 and the walls are treated completely, regardless of the extent of the lesion by the fungus. After that, leave to dry for a day and wash off with water. After drying, if necessary, repeat after 2.5 days. Works are carried out in protective equipment. The drug is stored after opening 36 months. Buyers report in reviews about the prolonged action of the antiseptic.

6 Olympus stop mold

Designed for rooms with high humidity. Effectively removes mold from wood, tile, stone, brick, plaster, concrete. It is shown for use on facades, roofs of houses, basements. It protects and prevents the destruction, biodestruction of any surfaces. As part of no harmful volatile formations, so the drug is considered one of the safest for people and pets. The quality and color of the walls is not affected. Provides long-term protection against mold, mildew, moss and lichen.

Before applying the drug is recommended to remove contamination in the form of dust, fungal and moldy plaque. It is necessary to check for peeling of old paint, putty and other materials. The surface must be free of coarse debris.Evenly distribute the tool using a roller, brush, spray. The best result is achieved after applying 2 layers of the composition. Spray at a distance of 20 cm from the surface. The temperature at the time of work should not fall below +5 degrees. Olympus stop is sold ready to use. At a temperature of +20 degrees during work, the layers dry out within 1 day, after which decoration can be carried out.

5 AMSS

Highly effective against mildew and mold. It is applied on surfaces of different quality. Let's admit to use in kitchen, a bathroom, a balcony, a facade of the building and a roof. It does not change the quality of the material on which it is applied, therefore it is allowed for use on objects of the decor. The tool has the strongest effect against bacteria, not having in its composition of chlorine. It can be used for prevention during construction and finishing works. This will help avoid the appearance of dirt on the walls in consequence.

The built-in atomizer helps to conveniently use the product when applied to surfaces of different quality. Before starting work, wear goggles and gloves to avoid contact with the drug. Spraying should be carried out at a distance of 0.2 m from the wall until it is completely saturated with it. Leave for 3 days and then, without washing off, repeat the procedure if there are traces of contamination. Remaining on the wall can be washed off with water. The best place to store it is a dark and cold room. Should be transported at low temperatures and tightly closed. Expiration date of 5 years.

4 Phongifluid Alp

The composition of the fungicide includes components that reinforce each other in the fight against mold and fungus. It is considered the most convenient means of work, sold in finished form, does not require additional preparations. It is applied on surfaces of different quality and texture. To improve the effectiveness of the interaction of the drug with the surface, the manufacturer advises to pre-smooth the roughness, irregularities in order to increase the contact area.

Walls of any material are to be cleaned, as the tool carefully processes, leaves no stains, does not change the degree of staining, luster. The preparation consumption recommended by the manufacturer is 1 l per 5 m2. You can apply twice with a strong defeat. After the first treatment, it is necessary to leave the fungicide for 4-6 days until completely dry. At the discretion of the buyer, the procedure can be repeated. Can be used to prevent the appearance of fungus and mold.

3 Sazi Wepost Luxe

Effective antiseptic against fungi, mold on surfaces inside and outside the house. Strongly recommended for combined exposure in combination with a water repellent, which provides enhanced protection of surfaces against external factors. After drawing on the wall remains invisible layer of the drug, which serves as an obstacle to moisture penetration. The materials processed by him, increase their waterproofing characteristics.

At the first stage, the walls are treated with an antiseptic agent, which is part of it. In case of severe damage, the agent should be re-applied to the area affected by mold. After drying, Sazi is applied to it, left for the amount of time specified in the instructions, and the residue is cleaned. At the final stage, a water repellent is applied, which will reliably protect against dust, moisture and preserve the natural air exchange.According to consumers, the tool helps to cope with the problem for a long time.

2 Dali

It is considered the best preparation of universal action against mold, fungus, moss. They should process the surface of brick, concrete, wood, drywall. Plaster before treatment can not be removed from the walls, the tool penetrates through it. Apply Dali allowed on the interior and exterior walls. Before painting, pre-impregnate the walls with an antiseptic. As part of no chlorine, which makes the tool safe for allergy sufferers and people prone to diseases of the upper respiratory tract. The drug is characterized by high penetrating ability, rapid absorption and does not change the characteristics of the materials to which it is applied.

Treat recommended dry surface with a brush, roller, spray. The temperature at the time of processing should not be below +5 degrees. If the surfaces are strongly affected by mold, it is necessary to carry out mechanical cleaning, rinse with water, and dry thoroughly. After 24-48 hours, remove the remaining dirt with a brush. Before full drying, it takes a day. It is recommended to transport and store the drug at a temperature not lower than 0 and not higher than 40 degrees. According to consumers, the tool has a strong chemical smell, so you need to work in a respirator. Its shelf life is 24 months.

1 Savo

Convenient packaging of the drug allows the most efficient processing of surfaces of different quality and curvature. Approved for use to prevent mold. The active ingredient is sodium hypochlorite. It copes well with fungal contamination in saunas, swimming pools, basements, and attic rooms. No additional cleaning of contaminated surfaces is required before application. The main advantage of the drug is considered complete disposal of the problem.

To calculate the amount of funds for all surfaces, it is assumed that 50 mg is required per 1 m2 of its area. Spraying is carried out not more than 10 cm from the surface, carefully processing the cracks, sills, bulges, pits. Leave on for 20-30 minutes and rinse with water. After drying, decide on the need for re-processing. Consumer reviews suggest that a two-time procedure is enough to get rid of mold forever.

Popular vote - what is the remedy for mold on the walls you think is best?
We vote!

Biotol Spray

Belinka

Neomid Bio Repair

Abedis 06

Olympus stop mold

AMSS

Phongifluid Alp

Sazi Wepost Luxe

Dali

Savo

Maviks

PROSEPT

DULUX

Total votes: 1

Vote results